Watch list
was added to the project list.

Drive-over in-ground luminaires

For installation in ground surfaces · Floodlights with adjustable light distribution

An extensive and efficient series of LED in-ground luminaires for use both indoors and out. The entire luminaire housings are made of stainless steel. Depending on the installation situation, the luminaires can be installed using installation housings, or simply “floating”, for example in gravel, lawn surfaces, flowerbeds or in paved surfaces.

The luminaires can be driven over by vehicles with pneumatic tyres. The luminaires must not be used in areas where they are exposed to horizontal loads caused by braking, accelerating and changes of direction.

Material Stainless steel
Installation depth 140-225 mm
Pressure load 2000 kg
Protection class IP 68 10 m

Trim ring and luminaire housing made of stainless steel
Safety glass
Reflector made of pure anodised aluminium
1.8 m connecting cable with water stop

The inclination angle of the adjustable reflectors is adjustable from 0° to 30°. The optical system can be rotated ± 180° around the vertical axis of the luminaire.

77 146 · 84 115 · 77 147 · 77 148 DALI controllable

Please note:
The operating temperatures T specified in the table (according to EN 60598, ambient temperature ta 15 °C) are reached in the centre of the glass surface.

When the glass is wet, there may be a risk of slipping. For walkable public areas, we recommend skid-blocking glass in accordance with DIN 51130  R 13. With the additional specification R after the article number, we can supply all luminaires with skid-blocking glass. This increases the dispersion of the light distribution.

On request, the luminaires are available in the light colours green, blue, amber and red.

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

LED colour temperature
Glass surface
  Lamp Base β T A B C AC/DC
77 145   LED 6.0 W 262 lm 32° 25° 145 95 140
77 146   LED 11.5 W 456 lm 16° 30° 205 140 165
84 115   LED 21.8 W 1221 lm 35° 280 200 185
77 147   LED 14.0 W 938 lm 13° 25° 280 200 185
77 148   LED 34.0 W 1469 lm 13° 35° 330 240 225
88 750   1 HIT-TC-CE 35 W G 8.5 13° 75° 245 175 185
88 651   1 HIT-TC-CE 35 W G 8.5 75° 245 175 185
88 751   1 HIT-TC-CE 70 W G 8.5 14° 75° 330 240 225

BEGA Library

BEGA Library is a collection of digital publications from Lichtgruppe Gantenbrink. Learn more about our products, discover examples of impressive applications, and watch our high-definition videos.
Learn more


BEGA AR is pleased to help you assess our luminaires in your own private setting. In a virtual presentation you can place up to five different luminaires simultaneously in any positions you like: in the house, around the house or in the garden. You can then view them from all angles, switching them on and off and even taking photos ofthe various scenes.
Learn more

Electrical safety

The luminaires in this catalogue are designed and produced on the basis of the EN 60598/VDE 0711 standards. The majority of the luminaires bear the relevant test mark on the type plate as well as on the packaging and instructions for use. The other luminaires have been or will be submitted for certification, but the certification and approval procedure is still in progress. We can provide information on the status of the certification procedure at any time. Special orders are produced in accordance with the above set of regulations.
Learn more