Watch list
was added to the project list.

Drive-over in-ground luminaires

For installation situations with high pressure load for illuminating vertical surfaces

The design of these in-ground floodlights makes it possible to fully illuminate a vertical surface, e. g. a façade, as far as the lower edge – BEGA Patent DE 199 18872. The lower limit of the light distribution is a straight line, without the usual “light cone”.

All the metal components in this series are made of cast bronze and stainless steel. These luminaires stand out thanks to their high pressure load of 4000 kg. They are mounted in a recessed housing on a foundation that absorbs the pressure loads.

The foundation, including drainage, must be laid by the customer before installation. The luminaires can be driven over by vehicles with pneumatic tyres. The luminaires must not be used in areas where they are exposed to horizontal loads caused by braking, accelerating and changes of direction.


Material Cast bronze · Stainless steel
Installation depth 120 · 160 mm
Pressure load 4000 kg
Protection class IP 67

Luminaire cover made of cast bronze
Luminaire housing and recessed housing made of stainless steel
Safety glass
Reflector made of pure anodised aluminium
1.8 m connecting cable with water stop

77 819  DALI controllable

Please note:
The operating temperatures T specified in the table (according to EN 60598, ambient temperature ta 15 °C) are reached in the centre of the glass surface.

A shield is available for these luminaires to reduce the
light emission aperture from 90° to optionally 60° or 30°.
Shields are accessories and must be ordered separately.

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

LED colour temperature
  Lamp Base T A B C D
77 819 K3   LED 9.7 W DALI controllable 678 lm 30° 290 Ø 295 120 50
88 718   1 HIT-TC-CE 35 W G 8.5 85° 290 Ø 295 120 50
88 719   1 HI/HST-DE 70 W RX7s 100° 350 Ø 355 160 65
88 720   1 HI/HST-DE 150 W RX7s 170° 440 Ø 440 160 70

BEGA Library

BEGA Library is a collection of digital publications from Lichtgruppe Gantenbrink. Learn more about our products, discover examples of impressive applications, and watch our high-definition videos.
Learn more


BEGA AR is pleased to help you assess our luminaires in your own private setting. In a virtual presentation you can place up to five different luminaires simultaneously in any positions you like: in the house, around the house or in the garden. You can then view them from all angles, switching them on and off and even taking photos ofthe various scenes.
Learn more

Electrical safety

The luminaires in this catalogue are designed and produced on the basis of the EN 60598/VDE 0711 standards. The majority of the luminaires bear the relevant test mark on the type plate as well as on the packaging and instructions for use. The other luminaires have been or will be submitted for certification, but the certification and approval procedure is still in progress. We can provide information on the status of the certification procedure at any time. Special orders are produced in accordance with the above set of regulations.
Learn more