Watch list
was added to the project list.

Drive-over in-ground luminaires

For installation situations with shallow installation depths and for flush-mounting installation · Location luminaires

Luminaires specially for flush-mounting installation in ground surfaces. On account of the low height, these luminaires are also suitable e. g. for parking decks or suspended ceilings, both indoors and out. Before the luminaires are installed, the customer must lay a foundation that will absorb the pressure load of the luminaires. The luminaires can be driven over by vehicles with pneumatic tyres. The luminaires must not be used in areas where they are exposed to horizontal loads caused by braking, accelerating and changes of direction.


Material Stainless steel · Glass fibre reinforced synthetic material
Installation depth 145 mm
Pressure load 3000 kg
Protection class IP 67

Trim ring made of stainless steel, luminaire housing made of glass fibre reinforced synthetic material
Safety glass

1.8 m connecting cable with water stop

When the glass is wet, there may be a risk of slipping. For walkable public areas, we recommend skid-blocking glass in accordance with DIN 51130  R 13. With the additional specification R after the article number, we can supply all luminaires with skid-blocking glass. This increases the dispersion of the light distribution.

A maximum of 25 °C is reached as the operating temperature T in the centre of the glass surface (measured in accordance with EN 60598 at ambient temperature ta 15 °C).

On request, the luminaires are available in the light colours green, blue, amber and red.

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

LED colour temperature
Glass surface
Location luminaires 
  LED Power supply unit β T A B C AC/DC
84 450 K3   8.3 W 128 lm on/off 25° 245 275 145
Floodlights · symmetrical 
  LED Power supply unit β T A B C AC/DC
84 451 K3   16.5 W 1940 lm DALI controllable 20° 25° 245 275 145
Floodlights · asymmetrical 
  LED Power supply unit β T A B C AC/DC
84 452 K3   17.0 W 1748 lm DALI controllable 42/47° 25° 245 275 145
Floodlights · adjustable inclination angle 0° to 30° / vertical axis ±180° 
  LED Power supply unit β T A B C AC/DC
84 453 K3   12.0 W 538 lm DALI controllable 16° 20° 245 275 145

BEGA Library

BEGA Library is a collection of digital publications from Lichtgruppe Gantenbrink. Learn more about our products, discover examples of impressive applications, and watch our high-definition videos.
Learn more


BEGA AR is pleased to help you assess our luminaires in your own private setting. In a virtual presentation you can place up to five different luminaires simultaneously in any positions you like: in the house, around the house or in the garden. You can then view them from all angles, switching them on and off and even taking photos ofthe various scenes.
Learn more

Electrical safety

The luminaires in this catalogue are designed and produced on the basis of the EN 60598/VDE 0711 standards. The majority of the luminaires bear the relevant test mark on the type plate as well as on the packaging and instructions for use. The other luminaires have been or will be submitted for certification, but the certification and approval procedure is still in progress. We can provide information on the status of the certification procedure at any time. Special orders are produced in accordance with the above set of regulations.
Learn more