0
Drive-over LED on-ground luminaires
0
Watch list
was added to the project list.
×

Drive-over LED on-ground luminaires

For installation on ground level for illuminating ground surfaces


The construction principle of these luminaires provides a solution for numerous lighting applications on large-area ground surfaces. The significantly lower installation costs compared to recessed luminaires, and the different installation variations, reduce the overall installation costs and offer a high degree of flexibility. The luminaires are simply fixed to the substrate with a mounting plate. Just one core hole needs to be drilled by the customer for the cable to pass through.

The luminaires are simply connected with their connecting cable to any commercially available sleeves or to the BEGA distribution box 70 730. To meet the different requirements at the installation site, we offer an anchorage unit or connection housing as an accessory. They must be ordered separately. The luminaires can thus be installed in loose substrates such as sand or gravel.

Depending on the substrate‘s load-bearing capability, the luminaires can support a load of up to 1000 kg and withstand vehicles with pneumatic tyres. The luminaires must not be used in areas exposed to horizontal loads caused by braking, accelerating and changes of direction.

more

Protection class IP 67

77 089 · 77 090 Safety class I
77 069 · 77 070 Safety class III · without power supply unit
A separate power supply unit is required to operate the luminaires with safety class III.

Cast aluminium and stainless steel
Borosilicate glass
Reflector made of pure anodised aluminium

1.8 m connecting cable with water stop

Please note: The operating temperatures T specified in the table (according to EN 60598, ambient temperature ta 15 °C) are reached in the centre of the glass surface.

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

LED colour temperature
  Lamp T A B AC/DC
1 light sector 180°
77 069   LED 1.4 W 16 lm 20° Ø 160 40
77 089   LED 9.0 W 107 lm 25° Ø 270 55
 
1 light sector 360°
77 070   LED 2.8 W 22 lm 20° Ø 160 40
77 090   LED 15.0 W 206 lm 30° Ø 270 55

BEGA Library

BEGA Library is a collection of digital publications from Lichtgruppe Gantenbrink for the following brands: BEGA, GLASHÜTTE LIMBURG and BOOM. Learn more about our products, discover examples of impressive applications, and watch our high-definition videos.

Learn more

BEGA AR

BEGA AR is pleased to help you assess our luminaires in your own private setting. In a virtual presentation you can place up to five different luminaires simultaneously in any positions you like: in the house, around the house or in the garden. You can then view them from all angles, switching them on and off and even taking photos ofthe various scenes.

Learn more

Electrical safety

The luminaires in this catalogue are designed and produced on the basis of the EN 60598/VDE 0711 standards. The majority of the luminaires bear the relevant test mark on the type plate as well as on the packaging and instructions for use. The other luminaires have been or will be submitted for certification, but the certification and approval procedure is still in progress. We can provide information on the status of the certification procedure at any time. Special orders are produced in accordance with the above set of regulations.

Learn more