0
Impact-resistant ceiling and wall luminaires
0
Watch list
was added to the project list.
×

Impact-resistant ceiling and wall luminaires


A robust surrounding frame made of cast aluminium protects the edges and corners of the luminaire glass. This is thick crystal glass with precise light-diffusing structures. The different dimensions and light outputs of these luminaires, combined with their use as ceiling or wall luminaires, facilitate a host of lighting applications, both indoors and out. Its range of possible applications is also extended by its high protection class.

Protection class IP 65

Cast aluminium, aluminium and stainless steel
Crystal glass, inside white

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Finish
LED colour temperature
  Lamp Base A B C AC/DC
22 650   LED 8.3 W 369 lm 220 220 110
22 652   LED 10.2 W 549 lm 275 275 125
24 600   LED 11.5 W 833 lm 275 275 110
 
22 645   1 lamp 75 W E 27 220 220 110
22 646   1 lamp 100 W E 27 275 275 125

BEGA Library

BEGA Library is a collection of digital publications from Lichtgruppe Gantenbrink for the following brands: BEGA, GLASHÜTTE LIMBURG and BOOM. Learn more about our products, discover examples of impressive applications, and watch our high-definition videos.

Learn more

BEGA AR

BEGA AR is pleased to help you assess our luminaires in your own private setting. In a virtual presentation you can place up to five different luminaires simultaneously in any positions you like: in the house, around the house or in the garden. You can then view them from all angles, switching them on and off and even taking photos ofthe various scenes.

Learn more

Electrical safety

The luminaires in this catalogue are designed and produced on the basis of the EN 60598/VDE 0711 standards. The majority of the luminaires bear the relevant test mark on the type plate as well as on the packaging and instructions for use. The other luminaires have been or will be submitted for certification, but the certification and approval procedure is still in progress. We can provide information on the status of the certification procedure at any time. Special orders are produced in accordance with the above set of regulations.

Learn more