Watch list
was added to the project list.

LED emergency lighting luminaires

Ceiling and wall luminaires · In accordance with EN 60598-2-22

Combined LED emergency lighting luminaires with integrated single battery, optionally for 1 or 3 hours‘ emergency operation in the event of a power failure. Luminaires in accordance with EN 60598-2-22. BEGA emergency lighting luminaires with general illumination and emergency lighting are designed for three operating modes: stand-by, continuous mode or continuous mode with external switch.


Protection class IP 65

Cast aluminium and stainless steel
Crystal glass, inside white

DALI controllable

Integral nickel-metal hydride batteries
Please note: Battery capacity is reduced at ambient temperatures of less than 0 °C.

1 or 3 hours of emergency operation
Emergency lighting device with self-test function in the luminaire, battery monitoring, function test and operating time test are carried out automatically.

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Luminaire colour graphite

LED colour temperature
  LED General operation Power supply unit Emergency
33 196 K3   21.5 W 816 lm DALI controllable 105 lm · 1h 350 170
33 197 K3   21.5 W 816 lm DALI controllable 105 lm · 3h 350 170

BEGA Library

BEGA Library is a collection of digital publications from Lichtgruppe Gantenbrink. Learn more about our products, discover examples of impressive applications, and watch our high-definition videos.
Learn more


BEGA AR is pleased to help you assess our luminaires in your own private setting. In a virtual presentation you can place up to five different luminaires simultaneously in any positions you like: in the house, around the house or in the garden. You can then view them from all angles, switching them on and off and even taking photos ofthe various scenes.
Learn more

Electrical safety

The luminaires in this catalogue are designed and produced on the basis of the EN 60598/VDE 0711 standards. The majority of the luminaires bear the relevant test mark on the type plate as well as on the packaging and instructions for use. The other luminaires have been or will be submitted for certification, but the certification and approval procedure is still in progress. We can provide information on the status of the certification procedure at any time. Special orders are produced in accordance with the above set of regulations.
Learn more