0
0
Watch list
was added to the project list.
×

LED recessed luminaires for walls and stairs

Asymmetrical light distribution


Van Ham Art Auctions, Cologne
Van Ham Art Auctions, Cologne
Van Ham Art Auctions, Cologne
Van Ham Art Auctions, Cologne
Westend Ottensen, Hamburg
Open University, Hagen
Tempe Town Lake Pedestrian Brücke, Arizona
Museum of the Forming Arts, Leipzig
Santa Monica Public Library

For decades, BEGA luminaires with this design have been outstanding lighting construction details on numerous structures worldwide. As their successors, these new luminaires have been adapted to today’s installation situations and to our LED technology.

The slim yet screwless luminaire frames of this new series are design-defining. The extremely low maintenance requirements of our LED technology enable a new product concept with far easier and quicker installation.

The electrical connection is now comfortably made before installation in the structure. The installed luminaire is then secured with the BEGA mounting system in the structure, e.g. in drywalls or in an installation housing.

You can choose between two installation housings and two plaster frames for the various installation situations. The luminaires can be surface-mounted as usual or they can be flush-mounted in plastered walls.

The installation dimensions of these new luminaires are identical to those of the previous luminaires. Depending on their size, the luminaires can be installed in staircase risers and in walls both indoors and out.

The light of these luminaire groups is directed downwards and is shielded above the light emission level. Luminaires with asymmetrical light distribution illuminate ground surfaces in the depth of the room.

more
Share

Protection class  IP 65

Cast aluminium, aluminium and stainless steel
Reflector made of pure anodised aluminium
Safety glass

33 058 · 33 059 · 33 060  DALI controllable

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Installation

You can choose between two installation housings and two plaster frames for the various installation situations. The luminaires can be surface-mounted as usual or they can be flush-mounted in plastered walls. 

  • Type A

    Installation housing
    When making the recessed opening in masonry or concrete walls, it may be practical to use an installation housing.

  • Type B

    Installation housings for external wall insulation systems (EWIS)
    With various intermediate elements, this installation housing allows adjustment to insulation depths from 120 mm to 200 mm.

  • Type C

    Plaster frame surface-mounted
    In conjunction with installation housing type A or B, the luminaires can be surface-mounted, e.g. for installation in walls that will be subsequently plastered.

  • Type D

    Plaster frame flush
    In conjunction with installation housing type A or B, the luminaires can be flush-mounted, e.g. for installation in walls that will be subsequently plastered.

Installation housings for external wall insulation systems (EWIS)

For installation in external wall insulation systems (EWIS), BEGA supplies special installation housings. The modular design and combination of the individual insulation elements in 20 mm increments allow for flexible adaptation to insulation depths of 120 to 200 mm. According to the findings of the German Passive House Institute (PHI), these create no thermal bridges or any other issues.

During installation, the installation housing is filled up with installation elements from the scope of delivery, depending on the insulation depth, and secured on the facade with screws. The plaster frame, which is required separately, can then be inserted into the installation housing and aligned with the plaster thickness. Once the plastering work is finished, the plaster frame remains as a closing edge in the wall.

Lighting technology

BEGA luminaires are available with different lighting parameters to provide efficient solutions for demanding lighting applications in a wide range of architectural situations. Additional components allow flexible and constructive lighting planning with BEGA luminaires.

LED technology

LED technology has redefined acquired standards and assessment criteria and created undreamt-of possibilities for designing with light. The sum total of its advantages makes this technology a milestone in lighting technology.
We use the superiority of LED in the development of new luminaires, but also in the technical perfection of existing luminaire series. In doing so, we go well beyond the applications normally expected on the market. We do this responsibly, competently and with a sense of proportion – but above all reliably. After all, reliability and a high standard of product quality are among our elementary values and convictions.In the development of our luminaires, therefore, thermo-management represents a great challenge. Efficiency and service life are already convincing and still improving. Module output and shape are variable and can be perfectly adapted to each luminaire. In addition to using high-grade components, we have also made design-related changes which contribute to favourable temperature conditions inside the luminaires.

More information about our LED technology

Finish
LED colour temperature
  Lamp A B C AC/DC
33 053 K3   LED 5.5 W 231 lm on/off 170 70 65 ✓
33 054 K3   LED 7.8 W 342 lm on/off 260 70 65 ✓
33 055 K3   LED 11.0 W 480 lm on/off 320 70 65 ✓
33 058 K3   LED 14.8 W 1000 lm DALI controllable 330 125 90 ✓
33 059 K3   LED 19.5 W 1486 lm DALI controllable 420 125 90 ✓
33 060 K3   LED 24.0 W 1869 lm DALI controllable 520 125 90 ✓

Matching products

close

BEGA Library

BEGA Library is a collection of digital publications from Lichtgruppe Gantenbrink. Learn more about our products, discover examples of impressive applications, and watch our high-definition videos.
Learn more

BEGA AR

BEGA AR is pleased to help you assess our luminaires in your own private setting. In a virtual presentation you can place up to five different luminaires simultaneously in any positions you like: in the house, around the house or in the garden. You can then view them from all angles, switching them on and off and even taking photos ofthe various scenes.
Learn more

Electrical safety

The luminaires in this catalogue are designed and produced on the basis of the EN 60598/VDE 0711 standards. The majority of the luminaires bear the relevant test mark on the type plate as well as on the packaging and instructions for use. The other luminaires have been or will be submitted for certification, but the certification and approval procedure is still in progress. We can provide information on the status of the certification procedure at any time. Special orders are produced in accordance with the above set of regulations.
Learn more

Close language selection

Select language:

Please note: Products are available in the Unites States and Canada in conformance with UL and CSA standards:
visit www.bega-us.com

Please enter your search word:

More search options
Close search

You must agree to our terms and conditions of use in order to download this file

Materials provided for download by BEGA are application examples of our products as well as representations of their technical specification. They are not intended to be used to advertise our products. Hence, BEGA merely grants the user the right to reproduce these materials for non-commercial purposes. Any utilization beyond this purpose requires written licensing by BEGA.
close
    
    
    
        schließen