0
0
Watch list
was added to the project list.
×

LED wall washers

Symmetrical and asymmetrical light distribution


Luminaires with symmetrical light distribution are used for illuminating wall surfaces. The mounting surface acts simultaneously as a reflection surface.

Depending on the direction of the beam, luminaires with asymmetrical light distribution mainly illuminate the surfaces adjacent to the installation surface, such as ceilings, arches, canopies, cantilever plates or ground surfaces.

The burning position of the luminaires can be chosen freely. In addition, two luminaire lengths and the dimmability of the luminaires allow a wide range of applications both indoors and out.

Protection class IP 65

Cast aluminium, aluminium and stainless steel
Safety glass
Reflector made of pure anodised aluminium

Dimmable 1-10 V

The luminaires can be installed in any burning position.

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Finish
LED colour temperature
  Lamp A B C AC/DC
Symmetrical light distribution
44 573   LED 24.0 W 1344 lm 530 80 115
44 574   LED 45.0 W 2874 lm 980 80 115
 
Asymmetrical light distribution
44 582   LED 24.0 W 1239 lm 530 80 115
44 583   LED 45.0 W 2655 lm 980 80 115

Matching products

BEGA Library

BEGA Library is a collection of digital publications from Lichtgruppe Gantenbrink. Learn more about our products, discover examples of impressive applications, and watch our high-definition videos.
Learn more

BEGA AR

BEGA AR is pleased to help you assess our luminaires in your own private setting. In a virtual presentation you can place up to five different luminaires simultaneously in any positions you like: in the house, around the house or in the garden. You can then view them from all angles, switching them on and off and even taking photos ofthe various scenes.
Learn more

Electrical safety

The luminaires in this catalogue are designed and produced on the basis of the EN 60598/VDE 0711 standards. The majority of the luminaires bear the relevant test mark on the type plate as well as on the packaging and instructions for use. The other luminaires have been or will be submitted for certification, but the certification and approval procedure is still in progress. We can provide information on the status of the certification procedure at any time. Special orders are produced in accordance with the above set of regulations.
Learn more