Watch list
was added to the project list.

Surface washers

Shielded directed light · Single and double

Surface washers for the uniform illumination of ground surfaces. The luminaire housing is adjustable, allowing the light distribution to be adapted to the requirements of the installation site. The wide beam light distribution is particularly suitable for illuminating paths and entrance areas, driveways and many areas of garden and landscape architecture.


Protection class  IP 65

Cast aluminium, aluminium and stainless steel
Safety glass
Reflector made of pure anodised aluminium

Attack angle infinitely adjustable from 0° to 90°

88 556  dimmable 1-10 V

BEGA surface washers are bolted with a mounting plate onto a foundation provided by the customer or on an anchorage unit made of hot-dip galvanised steel.
The mounting system can be used to align the luminaires.

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

LED colour temperature
  Lamp Base A B C AC/DC
88 556 K3   LED 29.0 W 1945 lm 260 1200 360
88 875   1 TC-TELI 42 W GX 24 q-3/4 260 1200 360

BEGA Library

BEGA Library is a collection of digital publications from Lichtgruppe Gantenbrink. Learn more about our products, discover examples of impressive applications, and watch our high-definition videos.
Learn more


BEGA AR is pleased to help you assess our luminaires in your own private setting. In a virtual presentation you can place up to five different luminaires simultaneously in any positions you like: in the house, around the house or in the garden. You can then view them from all angles, switching them on and off and even taking photos ofthe various scenes.
Learn more

Electrical safety

The luminaires in this catalogue are designed and produced on the basis of the EN 60598/VDE 0711 standards. The majority of the luminaires bear the relevant test mark on the type plate as well as on the packaging and instructions for use. The other luminaires have been or will be submitted for certification, but the certification and approval procedure is still in progress. We can provide information on the status of the certification procedure at any time. Special orders are produced in accordance with the above set of regulations.
Learn more