0
0
Watch list
was added to the project list.
×

Wall luminaires

Light emission on one or two sides


These wall luminaires with different light outputs and lengths open up many design options in lighting architecture. Luminaires with shielded light source, optionally with light emission on one or two sides. Wall luminaires with a high protection class for use both indoors and out. These are brilliant design elements which allow interesting illumination concepts individually, in rows or groups.

Share

Protection class IP 65

Cast aluminium, aluminium and stainless steel
Safety glass

DALI controllable

Luminaires with light emission on one side must be mounted with the light emission directed downwards.

The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result of technical progress. On our website you will find data sheets with information on each luminaire concerning not only the current values but also the LED service life and the luminous flux in relation to the respective colour temperature.

Planning examples

On the basis of our empirical values and the suggestions of architects and planners, we have compiled room situations for which lighting design is frequently required. In the following, we shall present possible illumination solutions for these architectural situations. It goes without saying that all technical lighting standards are complied with. In some cases, the degree of illuminance proposed by us may even exceed the standard. For us, the aesthetics of light and a high level of visual comfort are important criteria for such decisions. At the same time, the form and the size of the luminaires must fit into the architectural surroundings. For example, we often recommend larger models if a structure has large dimensions – even if smaller luminaires with lower output would be enough. In such cases, the degree of illuminance can be reduced to a suitable level by means of a light control system.


Bridge

Bridges are architectural landmarks which leave a lasting impression of a city. The illumination of bridges is thus of particular significance. Through the accentuation of its striking form, the structure also has an effect at night and, at the same time, can clearly be identified as a point of orientation. The floodlights used are fitted with shields and louvres to prevent undesired stray light...

learn more



Pedestrian subway

A pedestrian subway between two building complexes should correspond to the style of the building architecture. In this case it is open, light architecture, which corresponds to daylight on account of large glass surfaces. This light effect should also be achieved in the underground connection. A graphic arrangement of wall luminaires with light emission on two sides thus accompanies the visitors...

learn more



Finish
LED colour temperature
Light emission on one side 
  LED Power supply unit A B C AC/DC
44 417 K3   21.2 W 665 lm DALI controllable 620 105 125
44 418 K3   26.8 W 1228 lm DALI controllable 1220 105 125
44 419 K3   36.0 W 1398 lm DALI controllable 1520 105 125
 
Light emission on two sides 
  LED Power supply unit A B C AC/DC
44 436 K3   22.0 W 733 lm DALI controllable 620 105 125
44 437 K3   27.0 W 1706 lm DALI controllable 1220 105 125
44 438 K3   34.0 W 1645 lm DALI controllable 1520 105 125

Matching products

BEGA Library

BEGA Library is a collection of digital publications from Lichtgruppe Gantenbrink. Learn more about our products, discover examples of impressive applications, and watch our high-definition videos.
Learn more

BEGA AR

BEGA AR is pleased to help you assess our luminaires in your own private setting. In a virtual presentation you can place up to five different luminaires simultaneously in any positions you like: in the house, around the house or in the garden. You can then view them from all angles, switching them on and off and even taking photos ofthe various scenes.
Learn more

Electrical safety

The luminaires in this catalogue are designed and produced on the basis of the EN 60598/VDE 0711 standards. The majority of the luminaires bear the relevant test mark on the type plate as well as on the packaging and instructions for use. The other luminaires have been or will be submitted for certification, but the certification and approval procedure is still in progress. We can provide information on the status of the certification procedure at any time. Special orders are produced in accordance with the above set of regulations.
Learn more